Best Camera MDR To MDR Cable 26 Pin Camera Link Manufacture |Shine Industry

MDR To MDR Cable For Camera Link Industrial Camera

What is Camera Link MDR to MDR Cable For Industrial Camera ?

Camera Link interface MDR to MDR cable
was developed for high-speed industrial camera applications.
In the late 20 centory, the National Semiconductor Laboratory developed the Channel Link (C-Link for short) chipset. The interface of the chip increases the transmission speed of 250Mbit/s to 6.4Gbit/s while maintaining the original cost.
Promoted by the American Automation Industry Association (AIA) in 2000, Channel Link has gradually become the industry standard for scientific and industrial machine vision products , including cameras , cables , and frame grabbers. It has been called Camera Link since then.
Camera Link is the 4-channel chipset Channel Link version, using a with a transmission speed of 2.38Gbit/s. If with three more chipsets are placed in parallel, the maximum data transmissionspeed can exceed 7Gbit/s. With such fast data interfaces, industrial cameras are driven to higher resolutions and higher frame rates.
The Camera Link interface have big size MDR and small size SRD (SDR also called HDR-mini). The both pin definitions are exactly the same, just the size is different. MDR was originally developed for use in industrial automation.

Inquiry Now

Camera Link MDR To MDR Cable For Machine Vision

Brief For Industrial Camera MDR To MDR Cable Machine Vision

Compliant with the Camera Link standard, high-speed industrial cameras for machine vision
Excellent shielding performance to ensure stable and accurate data transmission
PA66 shell with high strength and durability
100% electronic functional testing. RoHS and REACH Compliant
High soft material, suitable for towline application
Over 10 million bending cycles
Strong anti-interference ability and low power consumption
High speed up to 6.4Gbit/s
Cable length coud be customized
For Dalsa Sory JAI AVT Pointgrey Omron Vieworks and other brand

Machine Vision MDR To MDR Cable Of Camera Link Technical Paremeters:

Place of Origin : Guangdong , China
Product Name : Camera Link MDR to MDR cable
Type : Machine vision cable
Shielding : Yes
Interface Standard : Camera link
Application : Machine vision
Gender : Male
Pin number : 26 pin
Voltage : 12V
Cable gauge: 28 AWG data line , 24 AWG power line
Cable OD : 9.3mm
Cable length : 1M 3M 5M 10M 0r customized length
Contact material : copper (gold-plated)
Shell material : PA66
Temperature range : -25~+85
Waterproof degree : Non-waterproof
Connector : HONDA from Japan , support PoCL power
System requirements : industrial PC with free MDR interface and Camera Link frame grabber
Certification : CE ROHs

Camera Link MDR To MDR Cable For Machine Vision Dimension

High Flex Cables Of Camera Link MDR To MDR Cable For Machine Vision

Conductor structure
Flexible cables generally use thin conductors. The thinner the conductor, the better the flexibility of the cable. If the conductor is too thin, problems will also occur, such as the phenomenon of cable entanglement.
Core wire insulation
Insulation materials within the cable must not stick to each other. If it sticks together, it may cause problems during the pulling process.
Tightly braided shield
The tightly braided shielding layer has better EMC protection ability, can also prevent the shielding function from failure caused by the shielding layer also breaking , and also has a better anti-torsion effect .
Cable jacket
Cable jackets of different materials have different protective effects, some have anti-UV function, some have anti-low temperature function, and some can resist oil pollution. These coats all have to be highly abrasion resistant and not stick to the task object.

Why Does Industrial Camera MDR To MDR Cables Needs To Be Shieled And High Flexiable

The industrial camera cable for machine vision will transmit the datas from the camera to controller , the actuator will execute orders accord to datas , if the datas is affected by the environment , then controller will get wrong datas , and actuator will make wrong movement .
Most of the industrial camera are used for automatic equipments , the industrial camera cables may be installed in the towline , the cables will move with the towline , ordinary cables will damage during the movement .

Notice For The Machine Vision MDR To MDR Cable Of Camera Link

The machine vision MDR to MDR cable should not be connected or disconnected while working , or the camera may be damaged
The installation should follow instruction and by professional operators
Camera link MDR cable has power supply (Pocl) and also has no power supply. Please confirm clearly before installation and cannot replace each other.

Machine Vision Cable Family For Industrial Cameras

Besided Camera Link MDR to MDR cables , we also produce USB2.0/3.0、1394a/1394b、CamerLink、Gige、CoaXPress with M12 to USB , M12 to DB15 , USB to MicroB , M12 t0 RJ45 , SDR t0 SDR , SDR to MDR different industrial camera cable connectors for Sick , Cognex , Baumer , Turck , ADLINK , BALLUFF ,BASLER , IMAGINGSOURCE , AVT , FLIR , LMI , Microscan , DATALOGIC , Keyence and other brands .

machine vision cable connector industrial camera cognex sick baumer balluff basler

FAQ For MDR To MDR Cable Of Camera Link Machine Vision

Are you producer for the machine vision cables？

Answer : Yes,we had been producing waterproof connectors for more than 10 years, is ISO9001 manufacture in China .

Can you produce machine vision cables with our logo and requirements ?

Answer : Yes , but that will have MOQ

Do you also have SDR to SDR and SDR to MDR industrial camera cables ?

Answer : Yes , please check the webpage as SDR to SDR industrial camera cable , industrial camera SDR to MDR cable .

How about the delivery time ?

Answer : It will depends on your order quantity and the production shedule , normally samples need 3-5 days .

Do you tested your industrial camera cables with the different brands cameras ?

Answer : Yes, and we had supplied for years, the industrial camera cables are compatible with these brands cameras .

Can you introduce your company ?

Answer : We had been producing waterproof connector for more than 10 years,and the founder have 20 years waterproof connector experience,the factory is ISO9001 certificated , anaual sales more than 20million USD,more than 300 workers , and we can offer free sample to test .