M12 Connector PCB Mount-THD SMD THR Mount

M12 PCB connector is also called M12 PCB mount connector , it’s M12 panel mount connector that could be installed on PCB , it has 3 types : THD-through hole device , SMD-surfance mount device , THR-through hole reflow mix mount device . The M12 connector PCB mount has straight types and right angle type . Following are PCB mount M12 connectors for different coding types :

M12 PCB Connector-For Sensor And Automation , Through Hole PCB Mount

Male M12 PCB Connector

The straight M12 PCB mount connector is avaialble for A code 2 pin , 3 pin , 4 pin , 5 pin , 6 pin , 8 pin , 12 pin , 17 pin , B code 4 pin and D code 4 pin , inquire for datasheet or 3D drawing

  • Pin quantity : 2 3 4 5 6 8 12 17 pin
  • Coding : A-code , B code , D code
  • Shape : straight 
  • Gender : male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm , PG9
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

The M12 female PCB connectors are mainly back panel mount , if it’s front panel mount, will be hard to mount on PCB after installed to the bulkhead , inquire for datasheet or 3D drawing

  • Pin quantity : 2 3 4 5 6 8 12 17 pin
  • Coding : A-code , B code , D code
  • Shape : straight 
  • Gender : female
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm , PG9
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

The right angle M12 bulkhead connector only has PCB mount , it’s not available for A coded 17 pin , the locking thread M12x1 is also different , inquire for datasheet or 3D drawing

  • Pin quantity : 2 3 4 5 6 8 12 pin
  • Coding : A-coded , B coded , D coded
  • Shape : right angle
  • Gender : male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

Before purchase female M12 right angle PCB connector it’s important to make the right PCB layout and make precise measurement , or the user may have problem to install it , inquire for datasheet or 3D drawing

  • Pin quantity : 2 3 4 5 6 8 12 pin
  • Coding : A-coded , B coded , D coded
  • Shape : right angle 
  • Gender : female
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

A coded M12 PCB mount connector is used for sensor , actuator , small power supply , data transmission and automation applications , B coded M12 PCB connector is used for Profibus , C coded M12 PCB mount connector is used for small AC power supply , the connector can be male or female , grounded or not , straight ones are back panel mount , with M12 , PG9 or M16x1.5mm locking thread , the right angle ones have M12x1.0mm locking thread .

Ethernet M12 PCB Mount Connector-M12 D Coded , X Coded , Y Coded

The PCB connector could be used 100M bps data transmission , could be used for industrial Ethernet switch , vision cameras  , inquire for datasheet or 3D drawing

  • Pin quantity : 4 pin
  • Coding : D coded
  • Shape : right angle 
  • Gender : female , male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

It has M16x1.5mm locking thread to the bulkhead , had been widely used for high speed data transmission such as industrial Ethernet and machine vision cameras , inquire for datasheet or 3D drawing

  • Pin quantity : 8 pin
  • Coding : X coded
  • Shape : straight 
  • Gender : female
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

It’s high speed data tranmission connector , upto 10G bps , could be used for high-precision image and video transmission or automation robots control  , inquire for datasheet or 3D drawing

  • Pin quantity : 8 pin
  • Coding : X coded
  • Shape : right angle 
  • Gender : female
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

It’s hybrid connector which could transmit both data and power within one connector , good choice for equipment that has small size , inquire for datasheet or 3D drawing

  • Pin quantity : 6 pin , 8 pin
  • Coding : Y coded
  • Shape : straight
  • Gender : female
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

M12 Y code right angle PCB connector could be used for automation control equipments or machine vision cameras , it support 100M bps data transmission and 300W power , inquire for datasheet or 3D drawing

  • Pin quantity : 6 pin , 8 pin
  • Coding : Y coded
  • Shape : right angle
  • Gender : female
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

Ethernet M12 PCB connector had been widely used for Industrial Ethernet switch , machine vision cameras , railway systems , traffic control systems , D coded M12 PCB connector could transmit data at 100M bps , X Coded M12 PCB connector could transmit data at 10G bps , Y coded M12 PCB connector is hybrid connector which could supply both power connection and data transmission , the transmission speed is 100M bps . 

SMD And THR M12 PCB Connector

THR mount is similar as SMD , it has both advantages of SMD and through hole mount , greatly improves the reliability of the installation , inquire for datasheet or 3D drawing

  • Pin quantity : 2 3 4 5 6 8 12 17 pin
  • Coding : A coded , B coded
  • Shape : straight 
  • Gender : male , female
  • Mount Position : front or back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-SMD , THR
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1mm , M15x1mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

The connector had been widely used for data transmission , it has SMD surface mount and THR through hole reflowing mount types , data transmission speed up to 100G bps , inquire for datasheet or 3D drawing

  • Pin quantity : 4 pin
  • Coding : D coded
  • Shape : straight 
  • Gender : male , female
  • Mount Position : front or back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-SMD , THR
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1mm , M15x1mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

X coded M12 SMD connector is getting more popular as its high data transmission speed , and SMD mount makes the production effiency very high , inquire for datasheet or 3D drawing

  • Pin quantity : 8 pin
  • Coding : X coded
  • Shape : straight 
  • Gender : female
  • Mount Position : front or back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-SMD , THR
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M12x1mm , M15x1mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

SMD and THR M12 PCB connector has similar apperance , but the THR ones have longer pins for reflow soldering , the SMD and THR M12 PCB mount connector is available for M12 A Coded , B coded , D coded , and X coded . Shine Industry offer front panel shell or back panel mount shell , the shell could be customized .

M12 PCB Connector For Power Supply

It’s AC power PCB connector which could supply up to 7KW , available for both male and female , more engineer choose it as AC power connector , inquire for datasheet or 3D drawing

  • Pin quantity : 2 pin , 3 pin , 4 pin
  • Coding : S coded
  • Shape : straight 
  • Gender : female , male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD through hole
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

T code PCB M12 connector has rated voltage 60V and rated current 12A , could supply up to 700W power in M12 size , it has male and female for option , inquire for datasheet or 3D drawing

  • Pin quantity : 2 pin , 2+PE , 3+PE
  • Coding : T coded
  • Shape : straight 
  • Gender : female , male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD through hole
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

L code PCB M12 connector is designed for DC power supply , has various pin arrangements , the PE mean ground pin , insure safely connection , inquire for datasheet or 3D drawing

  • Pin quantity : 2 pin , 2+PE , 3+PE , 4+PE
  • Coding : L coded
  • Shape : straight 
  • Gender : female , male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD through hole
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

K code M12 PCB connector is AC power connector which has rated voltage 800V and rated current 16A , could be used for AC power equipments , especially for those with small size , inquire for datasheet or 3D drawing

  • Pin quantity : 2 pin , 2+PE , 3+PE , 4+PE
  • Coding : K coded
  • Shape : straight 
  • Gender : female , male
  • Mount Position : back panel mount
  • Shell material : nickel plated brass
  • Contact material : gold plated copper
  • Termination : PCB mount-THD through hole
  • IP Rating : IP67
  • Insulator : TPU
  • Locking thread : M16x1.5mm
  • O-ring  : NBR
  • Durability : 500 cycles
  • Standard : IEC 61076-2-1012

M12 PCB connector that used for power supply is available for M12 L coded , T coded , K coded , S coded and M coded , Shine Industry don’t have SMD or THR version for these connectors , these connectors have M16x1.5mm locking thread , are made of nickel plated brass , could be used for AC or DC power connection .

Contact Us

Address

  • Factory Address
  • 5th Floor, C Building, Anlom Science Park, No. 381 Huating Road, Dalang Street, Shenzhen, Guangdong, China

  • Office Address
  • A203, 108 Technical Zone,Hebei Industry Park,Dalang South Road,Longhua District,Shenzhen,China

E-mail Address

Send Us a Message