Shine Industry-CAZN M Connector Order And Name RulesShine Industry
Part number ：
First Part : The series of the connector , for example M5 , M8 , M12 , M16 , M623 , M923 , 7/8
2nd Part : First letter in the 2nd part stands for gender , P means male , S means female
Second letter means the contact number , 8 means 8 pins
Third letter means the coding , A stands for Coding A , B stands for coding B
3rd Part : First letter stands for material(or type) of the connector , G means metal , P means plastic , M means overmolded connector .
Second letter means the terminaiton , W means welding(solder) , P means insertion , S means SMD , L means screw , C means crimping , T means through hole .
Third letter means the structure , A stands for straight plug , D means angle plug , B means front panel mount connector , F means rear mount connector , H means square flange connector , L means right angle PCB mount connector , S means SDM connector , O means terminal resistor .
Fourth and fifth connector stands for the cable locking nut size or the panel mount locking size , 08 means 8mm cable limits , P7 measn PG7 for 4-6mm cable OD , P9 measn PG9 for 6-8mm cable OD , M12 means 12mm locking thread
4th Part : First letter is number , means the cable length in meter , 1 stands for 1M , 2 stands for 2M , 2nd and 3rd letter means the cable jacket material , PV means PVC , PU stands for PUR ,
5th Part : One letter , S stands for shielded , if the part number don’t have this part , means the connector is unshielded
Order Code :
Order NO. Description The first part：series number + type number, each product has its part number on the album details page, and customers can choose according to the picture and part number; The second part：number of cores + interface model + wire + length. According to the following instructions, customers can fill in corresponding parameters as required to facilitate customization.